Money, money circulation and credit
Шрифт:
The National Bank of the Republic of Kazakhstan board of directors’ decision dated from December 23, 2002 № 510 «About the regulations adoption of the National interbank system of payment cards on the basis of microprocessing cards functioning).
For the first time the cash machines were implemented by several commercial banks in 1997. In the end of 2002 in Kazakhstan 702 cash machines functioned whereby their quantity grew on 30 % against 2001. To the beginning of 2010 6956 cash machines functioned already.
As on July 1, 2009 there are 19 banks and Kazpost JSC which perform plastic cards issue indeed. And the second-tier banks issue plastic cards of local systems: Altyn Card (Halyk Bank of Kazakhstan, JSC and ATF Bank, JSC); SmartAlemCard (BTA Bank, JSC); the local card of Citibank Kazakhstan (Citibank Kazakhstan, JSC) and Temir Card (BTA Bank, JSC, Temirbank, JSC).
Besides Kazakh banks issue and distribute payment cards of international systems: VISA International, Europay International, American Express International, China Union Pay and Diners Club International.
For the last five years the development of plastic cards in Kazakhstan became one of the most dynamically developing financial instruments of cashless settlement and credit money forms.
The 1st table shows that beginning from 2004 till July of 2009 all the other indexes of plastic cards market development in our Republic grew. Thus the circulated cards quantity for the analyzed period increased on more than 5 million items or by 4 times and ran at 7039.7 thousand items, consequently the average monthly balance on the cards’ accounts against the beginning of 2006 on 63124.4 million tenge.
Table 1
The plastic cards market development indexes in Kazakhstan
As on January 1, 2010 banks issued 7.6 millions of payment cards and the quantity of these cards holders reached 7.1 million people (against the analogue period of 2009 – growth on 6.5 and 7,0 % consequently). The most widely-spread payment cards are cards of international systems, their share reached 97.1 %, local systems – 2.1 %.
In December, 2009 the transaction volumes with payment cards usage of the Kazakhstans emitters composed 300.6 billion tenge (the growth in compare with December, 2008 composed 18.4 %). The transactions’ quantity for December, 2009 reached 12.6 million and increased against December, 2008 to 14.1 %. Whereby the growth of wire transfers quantity reached 23.8 % (2.2 million transactions) and the quantity of cash withdrawal operations – 12.2 % (10.3 million transactions).
Plastic cards are manufactured from a special plastic and basically have a standard size: 2.125»x3.375» (about 53.9x85.6 mm.) and width – 0.039 (~ 0.76 mm.).
Plastic cards can be classified according to a variety of parameters. One of the main is an intended purpose. Cards can be devided on banking (sometimes they are called payment) and nonbanking (identification, club and discount).
Banking cards are supposed to be issued and used for performing of banking operations: opening of the accounts, settlement and cash services, currency trading, etc. Such card is a long service result of banking system of payment mechanism improvement and an integral feature of a modern human.
This card contains the following information: on the front the name of holder, number, term of validity, emitting bank logotype and payment system logotype are recorded. Some cards have a hologram either as one of protective means from forgery and on the back side of card there are a place for holder’s signature, magnetic stripe, sometimes holder’s photo and logotypes of cash machines’ net where a card could be cashed.
Card’s number consists of 16 figures: the first six figures are an emitting bank code (Issuing Bank), the following nine figures are a banking card number (a number of card-account) and the last figure is confirming.
Payment card is a personalized payment instrument which offers its holder a possibility of cashless payment for goods and/or services and of encashment in the bank’s divisions (branches) and in the banking cash machines. The trade/service enterprises and bank divisions which accept the cards form a net of servicing points (or receiving network).
As electronic data storage device payment cards are divided on cards with magnetic stripes and cards with chips (microcircuits). The first are called magstripes and the second – smart cards or chip cards.
Cards with magnetic stripes have magnetic stripes on the back side which keep data including card’s number (banking current account), name of a holder, date of expiry (VISA, EUROCARD, MASTERCARD). Magnetic stripe doesn’t contain an information about the holder’s account status.
When card «passes through» a point-of-sale terminal it reads out a number of holder’s banking account from a magnetic stripe after that the terminal connects to a banking processing center in order to receive a confirmation about the required sum availability. Otherwise speaking the bank’s permission of an emitter is requested to perform an operation using this card.
Bank’s permission to perform an operation by means of banking card which constitutes bank’s obligation to transfer money according to settlement document drawn with its help is called authorisation. Upon the bank’s permission receipt a point-of-sale terminal prints a slip (a special trade check) in three copies: one for buyer, second stays in trade enterprise and third should be sent to bank for payment. On the basis of presented slip the bank debits the card’s holder account and transfers money to the trade enterprise account.