Настольная книга террориста

Автор неизвестен

fig. 4 completed bomb, showing tissue paper packing and explosive (side view)

A CO2 cartridge from a B.B gun is another excellent container for a low-order explosive. It has one minor disadvantage: it is time consuming to fill. But this can be rectified by widening the opening of the cartridge with a pointed tool. Then, all that would have to be done is to fill the CO2 cartridge with any low-order explosive, or any of the fast burning fuel-oxodizer mixtures, and insert a fuse. These devices are commonly called "crater makers".

A CO2 cartridge also works well as a container for a thermit incendiary device, but it must be modified. The opening in the end must be widened, so that the ignition mixture, such as powdered magnesium, does not explode. The fuse will ignite the powdered magnesium, which, in turn, would ignite the thermit.

The previously mentioned designs for explosive devices are fine for low-order explosives, but are unsuitable for high-order explosives, since the latter requires a shockwave to be detonated. A design employing a smaller low-order explosive device inside a larger device containing a highorder explosive would probably be used. It would look something like:

_____________ fuse

|

|

| _________ | _________ | ____|__________________________|___________|____ | | | * * * * * * * * * * * * * * *|* * * * * * * | | | | * * * * * * high explosive | * * * * * * * | | | | * * * * * * * * * * * * * * *|* * * * * * * | | | | * ______ _______________|_ ______ * | | | | * * | __| / - - - - - - | \ |__ | * | | | | * | |____/ low explosive - \____| | * | | | | * * |_______ - - - - - - - - - _______| * | | | | * * * * * \ - - - - - - - - / * * * * * | | | | * * * * * * \_________________/ * * * * * | | | | * * * * * * * * * * * * * * * * * * * * * * | | | | * * * * * * * * * * * * * * * * * * * * * * | | | | * * * * * * * * * * * * * * * * * * * * * * | | | |______________________________________________| | |_______| |_______|

If the large high explosive container is small, such as a CO2 cartridge, then a segment of a hollow radio antenna can be made into a low-order pipe bomb, which can be fitted with a fuse, and inserted into the CO2 cartridge.

4.43 GLASS CONTAINERS

Glass containers can be suitable for low-order explosives, but there are problems with them. First, a glass container can be broken relatively easily compared to metal or plastic containers. Secondly, in the not-too-unlikely event of an "accident", the person making the device would probably be seriously injured, even if the device was small. A bomb made out of a sample perfume bottle-sized container exploded in the hands of one boy, and he still has pieces of glass in his hand. He is also missing the final segment of his ring finger, which was cut off by a sharp piece of flying glass...

Nonetheless, glass containers such as perfume bottles can be used by a demented individual, since such a device would not be detected by metal detectors in an airport or other public place. All that need be done is fill the container, and drill a hole in the plastic cap that the fuse fits tightly in, and screw the cap-fuse assembly on.

________________________ fuse

|

|

|

_____|_____

| ___|___ |

| > | | drill hole in cap, and insert fuse;

| > | | be sure fuse will not come out of cap

| > | |

| | |

| |

| |

| | screw cap on bottle

| |

| |

V V

_________

>

>

>

/ \

/ \

/ \

| | fill bottle with low-order explosive

| |

| |

| |

| |

|___________|

Large explosive devices made from glass containers are not practicle, since glass is not an exceptionally strong container. Much of the explosive that is used to fill the container is wasted if the container is much larger than a 16 oz. soda bottle. Also, glass containers are usually unsuitable for high explosive devices, since a glass container would probably not withstand the explosion of the initiator; it would shatter before the high explosive was able to detonate.

4.44 PLASTIC CONTAINERS

Plastic containers are perhaps the best containers for explosives, since they can be any size or shape, and are not fragile like glass. Plastic piping can be bought at hardware or plumbing stores, and a device much like the ones used for metal containers can be made. The high-order version works well with plastic piping. If the entire device is made out of plastic, it is not detectable by metal detectors. Plastic containers can usually be shaped by heating the container, and bending it at the appropriate place. They can be glued closed with epoxy or other cement for plastics. Epoxy alone can be used as an endcap, if a wad of tissue paper is placed in the piping. Epoxy with a drying agent works best in this type of device.

|| ||

|| ||

||\_____________/||

|| ||

|| epoxy ||

||_______________||

|| ||

|| tissue ||

|| paper ||

||_______________||

||***************||

||***************||

||***************||

||***************||

||** explosive **||

||***************||

||***********----------------------- fuse

||***************||

||~~~~~~~~~~~~~~~||

|| ||

|| tissue ||

|| paper ||

||_______________||

|| ||

|| epoxy ||

|| _____________ ||

||/ \||

|| ||

|| ||

One end must be made first, and be allowed to dry completely before the device can be filled with powder and fused. Then, with another piece of tissue paper, pack the powder tightly, and cover it with plenty of epoxy. PVC pipe works well for this type of device, but it cannot be used if the pipe had an inside diameter greater than 3/4 of an inch. Other plastic puttys can be used int this type of device, but epoxy with a drying agent works best.

4.5 ADVANCED USES FOR EXPLOSIVES

The techniques presented here are those that could be used by a person who had some degree of knowledge of the use of explosives. Some of this information comes from demolitions books, or from military handbooks. Advanced uses for explosives usually involved shaped charges, or utilize a minimum amount of explosive to do a maximum amount of damage. They almost always involve high-order explosives.

4.51 SHAPED CHARGES

A shaped charge is an explosive device that, upon detonation, directs the explosive force of detonation at a small target area. This process can be used to breach the strongest armor, since forces of literally millions of pounds of pressure per square inch can be generated.